Authors Beginning With the Letter K

• Kachwele, M.

  • 2000 — With Abeli, W. S., Shemwetta, D. T.K., and Ole Meiludie, R. E.L., “Road Alignment and Gradient Issues in the Maintenance of Logging Roads in Tanzania”

• Kanzaki, K.

  • 1990 — With Ohasi, K., Deki, T., and Miyake, T., “On Capillary Path Systems In Steep Mountain Areas”

• Kanzian, Christian

  • 2006 — Avec Stampfer, Karl et Visser, Rien, “Cable Corridor Installation Times For European Yarders”

• Kärenlampi, Petri P.

  • 2010 — “The Effect of Logging Compartment Division on Harvesting Pricing”

• Kärhä, Kalle

  • 2005 — With Jouhiaho, Aki, Mutikainen, Arto, and Mattila, Salla, “Mechanized Energy Wood Harvesting from Early Thinnings”
  • 2004 — Avec Rönkkö, Esa et Gumse, Seppo-Ilmari, “Productivity and Cutting Costs of Thinning Harvesters”

• Karlsson, A.

  • 2005 — Avec Ligné, D. et Nordfjell, T., “New Techniques For Pre-Commercial Thinning --”

• Kash, Aaron

  • 2010 — Avec Dodson, Elizabeth M., “Production of a Rolloff Equipped Harwarder for Forest Biomass Utilization”

• Kellogg, L. D.

  • 2000 — Avec Han, H. S., “A Comparison of Sampling Methods for Measuring Residual Stand Damage from Commercial Thinning”
  • 1996 — Avec Milota, G. V. et Miller Jr., M., “A Comparison of Skyline Harvesting Costs for Alternative Commercial Thinning Prescriptions”
  • 1994 — Avec Bettinger, P., “Thinning Productivity and Cost for a Mechanized Cut-to-Length System in the Northwest Pacific Coast Region of the USA”

• Kellogg, Loren D.

  • 2009 — Avec Acuna, Mauricio A., “Evaluation of Alternative Cut-to-Length Harvesting Technology for Native Forest Thinning in Australia”
  • 2009 — Avec Bolding, M. Chad et Davis, Chad T., “Soil Compaction and Visual Disturbance Following an Integrated Mechanical Forest Fuel Reduction Operation in Southwest Oregon”
  • 2001 — With Drews, Erik S., Hartsough, Bruce R., and Doyal, James A., “Harvester-Forwarder and Harvester-Yarder Systems for Fuel Reduction Treatments”

• Kermani, A.

  • 1991 — Avec Lee, B. S., “Performance of Nailed Gusset Joints in Ridged Timber Portals”

• Kermani, Abdy

  • 1996 — “A Study of Semi­ridged and Non­Linear Behaviour of Nailed Joints in Timber Portal Frames”

• Keyes, Christopher R.

  • 2008 — With Matzka, Peter J., Wright, Kevin C., Glebocki, Radoslaw, and Han, Han-Sup, “Early Precommercial Thinning of Redwood Sprout Clumps:”

• Khlustov, V. K.

  • 1996 — Avec Gerasimov, Y. Y., “Thinning Regime Optimization in European Russian Pines”

• Kiljunen, Nuutti

  • 2004 — Avec Gingras, Jean-François, “INTRODUCTION”
  • 2003 — Avec Rantala, Juho et Harstela, Pertti, “Effect of Seedling Production and Long-Distance Transportation Planning Strategies on Transportation Costs of a Nursery Company”
  • 2002 — “Estimating Dry Mass Of Logging Residues From Final Cuttings Using A Harvester Data Management System”

• Kimsey, Mark

  • 2012 — Avec Roché, David, “Long-Term Site Preparation Effects on Volcanic Ash Forest Soils and Douglas-Fir”

• Kirk, P. M.

  • 1997 — With Byers, J. S., Parker, R. J., and Sullman, M. J., “Mechanisation Developments Within the New Zealand Forest Industry:”
  • 1996 — Avec Parker, R. J., “An Ergonomic Evaluation of Douglas Fir Manual Pruning in New Zealand”

• Kirk, Patrick M.

  • 2001 — Avec Sullman, Mark J.M., “Harvesting Wind Damaged Trees:”

• Klepac, John

  • 2001 — Avec Stokes, Bryce et Roberson, Joe, “Effect of Tire Size on Skidder Productivity Under Wet Conditions”
  • 2000 — With Hartsough, Bruce, Spinelli, Raffaele, and Pottle, Steve, “Fiber Recovery with Chain Flail Delimbing/Debarking and Chipping of Hybrid Poplar”

• Košir, Boštjan

  • 2000 — Avec Krc, Janez, “Where to Place and Build Forest Roads -- Experience From the Model”

• Krc, Janez

  • 2000 — Avec Košir, Boštjan, “Where to Place and Build Forest Roads -- Experience From the Model”